How to Make Your Own Dog Mask – The Basics

In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Make sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your dog air filter mask hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are flat and be sure that it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you’ll need to do some sanding to make sure that it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.